Σύνδεση για να δείτε αυτό το τεκμήριο σε άλλες γλώσσες
Influence of the radial depth of cut over the harmonic content of the Fourier spectrum in a milling of Aluminum 7075T6
Influencia de la profundidad radial sobre el contenido armónico del espectro de Fourier de las fuerzas en un fresado de Aluminio 7075 T6
Modelled cutting forces in an Aluminum 7075 T6 milling operation with a Kendu Kenal 4200.61 end mill of 16 mm of diameter, 2 cutting edges and helix angle of 30º. The calculations have been made with three radial depths of cut from 4 to 0,5 mm. The axial depth of cut is fixed at 8 mm, down-milling is used, with a feed per tooth of 0,2 mm and a spindle speed of 2400 rpm.
Δημιουργός
- Europeana
Τύπος τεκμήριο
- image
Δημιουργός
- Europeana
Τύπος τεκμήριο
- image
Φορέας προέλευσης
Συσσωρευτής
Δικαιώματα δικαιωμάτων για τα μέσα σε αυτό το τεκμήριο (εκτός αν ορίζεται διαφορετικά).
- http://creativecommons.org/licenses/by-nc-nd/3.0/
- http://creativecommons.org/licenses/by-nc-nd/3.0/
Δικαιώματα
- http://www.dmg-lib.org/dmglib/main/portal.jsp?mainNaviState=site.oairights
Αναγνωριστικό
- dmg:13573023
- http://www.dmg-lib.org/dmglib/handler?image=13573023
Σχέσεις
- University of the Basque Country, Spain
Χώρα
- Europe
Όνομα συλλογής
Πρώτη φορά δημοσιεύτηκε στην Europeana
- 2013-11-25T17:27:48.934Z
Τελευταία ενημέρωση από τον φορέα προέλευσης
- 2013-11-25T17:27:48.934Z