Prihlásiť sa, aby sa táto objekt zobrazila v iných jazykoch
Influence of the radial depth of cut over the harmonic content of the Fourier spectrum in a milling of Aluminum 7075T6
Influencia de la profundidad radial sobre el contenido armónico del espectro de Fourier de las fuerzas en un fresado de Aluminio 7075 T6
Modelled cutting forces in an Aluminum 7075 T6 milling operation with a Kendu Kenal 4200.61 end mill of 16 mm of diameter, 2 cutting edges and helix angle of 30º. The calculations have been made with three radial depths of cut from 4 to 0,5 mm. The axial depth of cut is fixed at 8 mm, down-milling is used, with a feed per tooth of 0,2 mm and a spindle speed of 2400 rpm.
Tvorca
- Europeana
Typ objekt
- image
Tvorca
- Europeana
Typ objekt
- image
Poskytujúca inštitúcia
Agregátor
Právny stav na médiá v tomto objekt (pokiaľ nie je uvedené inak)
- http://creativecommons.org/licenses/by-nc-nd/3.0/
- http://creativecommons.org/licenses/by-nc-nd/3.0/
Práva
- http://www.dmg-lib.org/dmglib/main/portal.jsp?mainNaviState=site.oairights
Identifikátor
- dmg:13573023
- http://www.dmg-lib.org/dmglib/handler?image=13573023
Vzťahy
- University of the Basque Country, Spain
Poskytujúca krajina
- Europe
Názov zbierky
Prvýkrát zverejnené na Europeana
- 2013-11-25T17:27:48.934Z
Naposledy aktualizované zo strany správcovskej inštitúcie
- 2013-11-25T17:27:48.934Z