Illoggja biex tara dan l-oġġett f'lingwi oħra
Influence of the radial depth of cut over the harmonic content of the Fourier spectrum in a milling of Aluminum 7075T6
Influencia de la profundidad radial sobre el contenido armónico del espectro de Fourier de las fuerzas en un fresado de Aluminio 7075 T6
Modelled cutting forces in an Aluminum 7075 T6 milling operation with a Kendu Kenal 4200.61 end mill of 16 mm of diameter, 2 cutting edges and helix angle of 30º. The calculations have been made with three radial depths of cut from 4 to 0,5 mm. The axial depth of cut is fixed at 8 mm, down-milling is used, with a feed per tooth of 0,2 mm and a spindle speed of 2400 rpm.
Kreatur
- Europeana
Tip ta' oġġett
- image
Kreatur
- Europeana
Tip ta' oġġett
- image
Istituzzjoni fornitriċi
Aggregatur
Dikjarazzjoni tad-drittijiet tal-midja f'dan ir-rekord (sakemm mhux speċifikat mod ieħor)
- http://creativecommons.org/licenses/by-nc-nd/3.0/
- http://creativecommons.org/licenses/by-nc-nd/3.0/
Drittijiet
- http://www.dmg-lib.org/dmglib/main/portal.jsp?mainNaviState=site.oairights
Identifikatur
- dmg:13573023
- http://www.dmg-lib.org/dmglib/handler?image=13573023
Relazzjonijiet
- University of the Basque Country, Spain
Pajjiż fornitur
- Europe
Isem il-kollezzjoni
L-ewwel darba ppubblikata fuq Europeana
- 2013-11-25T17:27:48.934Z
L-aħħar aġġornament mill-istituzzjoni fornitriċi
- 2013-11-25T17:27:48.934Z