Logga in för att se detta objekt på andra språk
Influence of the radial depth of cut over the harmonic content of the Fourier spectrum in a milling of Aluminum 7075T6
Influencia de la profundidad radial sobre el contenido armónico del espectro de Fourier de las fuerzas en un fresado de Aluminio 7075 T6
Modelled cutting forces in an Aluminum 7075 T6 milling operation with a Kendu Kenal 4200.61 end mill of 16 mm of diameter, 2 cutting edges and helix angle of 30º. The calculations have been made with three radial depths of cut from 4 to 0,5 mm. The axial depth of cut is fixed at 8 mm, down-milling is used, with a feed per tooth of 0,2 mm and a spindle speed of 2400 rpm.
Upphovsman
- Europeana
Typ av objekt
- image
Upphovsman
- Europeana
Typ av objekt
- image
Tillhandahållande institution
Aggregator
Rättighetsmärkning för media i detta objekt (om inte annat anges)
- http://creativecommons.org/licenses/by-nc-nd/3.0/
- http://creativecommons.org/licenses/by-nc-nd/3.0/
Rättigheter
- http://www.dmg-lib.org/dmglib/main/portal.jsp?mainNaviState=site.oairights
Identifierare
- dmg:13573023
- http://www.dmg-lib.org/dmglib/handler?image=13573023
Förbindelser
- University of the Basque Country, Spain
Tillhandahållande land
- Europe
Samlingens namn
Första gången publicerad på Europeana
- 2013-11-25T17:27:48.934Z
Sista uppdateringen från tillhandahållande institution
- 2013-11-25T17:27:48.934Z