Prijava za pregled ovog predmeta na drugim jezicima
Influence of the radial depth of cut over the harmonic content of the Fourier spectrum in a milling of Aluminum 7075T6
Influencia de la profundidad radial sobre el contenido armónico del espectro de Fourier de las fuerzas en un fresado de Aluminio 7075 T6
Modelled cutting forces in an Aluminum 7075 T6 milling operation with a Kendu Kenal 4200.61 end mill of 16 mm of diameter, 2 cutting edges and helix angle of 30º. The calculations have been made with three radial depths of cut from 4 to 0,5 mm. The axial depth of cut is fixed at 8 mm, down-milling is used, with a feed per tooth of 0,2 mm and a spindle speed of 2400 rpm.
Stvorio/la
- Europeana
Vrsta predmet
- image
Stvorio/la
- Europeana
Vrsta predmet
- image
Institucija iz koje dolazi
Agregator
Uvjeti korištenja medija u ovom zapisu (osim ako nije drugačije navedeno)
- http://creativecommons.org/licenses/by-nc-nd/3.0/
- http://creativecommons.org/licenses/by-nc-nd/3.0/
Prava
- http://www.dmg-lib.org/dmglib/main/portal.jsp?mainNaviState=site.oairights
Identifikator
- dmg:13573023
- http://www.dmg-lib.org/dmglib/handler?image=13573023
Odnosi
- University of the Basque Country, Spain
Država iz koje dolazi
- Europe
Naziv zbirke
Prvi put objavljeno na Europeana
- 2013-11-25T17:27:48.934Z
Zadnji put ažurirano od institucije koja pruža podatke
- 2013-11-25T17:27:48.934Z